Royal Model from
Italy have released a number of very nice new diorama accessories and materials
that will add some great detail to your new set-piece. Click on to see these
new lovely pieces in our preview…
Royal Model January/February 2015 releases.
Plastic chemical/water containers & bottles No. 2
(1/35 scale)
RM648
Resin, decals
€ 16.00
These twelve resin pieces are sculpted to make twelve
assorted shaped and sized plastic bins. All different shapes and sizes as you
tend to see now-days make this a good set for 60’s onwards till the modern day.
Decals for the containers add to the detail authenticity of this great set.
Leaves no.1
(1/35)
RM680
Photo-etched
€ 12.00
These wide leaves are made from brass photo etch in very
thin scale likeness as thin as you can get it. These look like maple leaves so
you can use them in a European or North American forest setting.
Leaves no.2
(1/35)
RM681
Photo-etched
€ 12.00
These wide leaves are made from brass photo etch in very
thin scale likeness as thin as you can get it. These look like poplar or beech
leaves, so you can use them in a European or North American forest setting.
Little red bricks bridge
(1/35-1/32 scale)
RM690
€ 28.00
Plaster
This small but well-constructed bridge is made from
lightweight plaster casts by Royal Model. It is wide enough to take most
vehicles in 1/32nd or 1/35th scales and it looks good for
a neat European-style crossing.
Horse
(1/35 scale)
RM701
€ 19.00
Resin
Either in the scenery or as part of the action - this resin
horse is sculpted in 35th scale, and it would be quite useful as
part of an Axis diorama. They used horses quite a lot in WWII so it is a handy
addition to your arsenal.
Leaves no.3
(1/35)
RM704
€ 12.00
Photo-etched
These wide leaves are made from brass photo etch in very
thin scale likeness as thin as you can get it. These look like poplar beech
leaves so you can use them in a European or North American forest setting.
Leaves no.4
(1/35)
RM705
€ 12.00
Photo-etched
These wide leaves are made from brass photo etch in very
thin scale likeness as thin as you can get it. These look like poplar birch
leaves so you can use them in a European or North American forest setting.
Leaves no.5
(1/35)
€ 12.00
RM706
Photo-etched
These wide leaves are made from brass photo etch in very
thin scale likeness as thin as you can get it. These look like elm leaves so
you can use them in a European or North American forest setting.
Welder set-WWII
(1/35 scale)
RM707
€ 16.00
Resin, metal, decals
Any work or garage scene from World War Two could do with
some tools, and this resin and metal set also has decals for the labels on the
welder.
There is not only the welder, but the heavy gloves and face
mask is included in this set. They are great by themselves but also with Royal
Model’s workshop figures in 35th scale.
Stowage - Universal Carrier
(1/35 scale)
RM709
€ 26.00
Resin
This stowage set for the universal carrier (Bren gun
carrier) pretty much fills your vehicle up. You can see the resin parts here
are comprising seventeen parts which represent amongst other things: A jacket,
a sleeping bag, folded tarps, a box, a square petrol tin, ammo packs swags, a
water bottle, some converged packs and tar as well as an umbrella!
Engine cover Universal Carrier
(1/35 scale)
RM710
€ 13.00
Resin
Designed to be used on your new Bren gun carrier kit from
Bronco or Riich Models, this section covers your engine compartment and it is
made from two resin parts. With this part you can show the engine compartment
lid laid to the side to expose the engine to the elements.
U.S. air compressor
(1/35 scale)
RM714
€ 18.00
Resin, metal, decals
This vintage WWII era compressor is another natural for the
garage of your diorama of the 40’s, 50’s or even 60’s workshop – I am sure
there are still some around now working – but this one is made from resin and
some metal with the number decals, data plate and dial markings shown just like
the one in this photograph of the completed compressor.
Water fountain
(1/35 scale)
RM715
€ 27.00
Resin
This centre peice looks just like many of the water
fountains spread right across southern Europe and especially in Italy, Greece, Spain
and southern France. They would look great in any time diagram, but the WWII village
square settings look like the perfect place for this resin set.
Generator
(1/35 scale)
RM717
€ 18.00
Resin, decals
This resin generator is a fairly modern piece would suit any
modern workshop or battlefield. The large resin block is very finely detailed
with several fine details and to make these details even more genuine the
decals are included to enhance the smallest of parts. Again the thick gloves
and the welding mask is included in the set.
Drinking fountain
(1/35 scale)
RM720
€ 12.00
Resin
Another centrepiece of a village square or even in a side
street – this water tap on a large plinth is cast in resin to represent a cast
iron drinking fountain. You could imagine this anywhere in a quiet European street
setting with people collecting water in buckets or drinking from the tap.
Electric Pole
(1/48 scale)
RM726
€ 14.00
Resin, Photo-etched
This smaller scale electric pole is a much needed scale dio
part for your 48th scale setting. There is precious little out there
on the market and this finely detailed resin and photo etched piece looks very
nice.
Electric Pole
(1/72 scale)
€ 12.00
RM727
Resin, Photo-etched
If we thought that any scale is underrepresented in scale
dio parts it would be in 1/72nd scale. This – just like the 48th
scale electrical pole by Royal, is finely detailed with photo etch to compliment
the resin pole. Only P.E. can match the scale thickness in this scale.
Citroen German Driver-WWII
(1/35 scale)
RM729
€ 12.00
Resin
This contemplative driver looks down at his cigarette as he
looks like he is waiting form maybe his charge or maybe he is just enjoying a
cigarette in a break from driving. He seems to sit perfectly on this bonnet of
the small Italian car but he would look as good on a Kubelwagen we thing.
Drinking fountain
(1/48 scale)
RM732
€ 9.00
Resin
This time cast in 48th scale – this water tap on
a large plinth is cast in resin to represent a cast iron drinking fountain. You
could imagine this anywhere in a quiet European street setting with people
collecting water in buckets or drinking from the tap.
TV (1930/50)
(1/35 scale)
RM733
€ 10.00
Resin
This small television is a very old looking box that we do
not think works in “hi-def”. The old CRT tube is a real square box and it is
made from resin. Although surprisingly the TV set as we know it was made in the
20’s it became a house-hold item after WWII. This set then could be anywhere
from the 40’s till the 60’s. I am sure some people even have set like this
laying around now in their basement!
Shopping cart
(1/35 scale)
RM737
€ 16.00
Photo-etched, resin
This excellent looking shopping cart is made from this photo
etched material. With the four wheels and the very thin meshed steel look this
is a great looking piece that would enhance a debris-strewn or urban modern
diorama perfectly.
Dingo Wheels
(1/35 scale)
RM741
€ 14.00
Resin
Coal stoves-WWII
(1/35 scale)
RM744
€ 14.00
Resin
Want to keep warm in the cold winter time and do not have
central heating? Well wood and coal stoves used to be the best way to do it –
these small cast iron stoves also heated up your meal and water as well as your
family and guests and could be used for not only this but one or two centuries
before. They are nicely cast in resin and are included with a stove-pipe to the
wall to ventilate the smoke.
All of these new
releases are now available through Royal Models website or their Distributors
Worldwide.