November 17, 2026

Preview: Border Model's 350th scale Pre-painted USS Kidd (DDG-100)...

Border Model has a 350th scale pre-painted USS Kidd (DDG-100). Marking choice, sprue map, features & the completed kit in our preview...


Preview: Border Model's 350th scale Pre-painted USS Kidd (DDG-100)...

Border Model has been making waves in the maritime modelling scene lately, and their newest upcoming release brings a heavily armed, modern US Navy icon to the bench in a very accessible format. We have the box art, sprue layout, decal sheet, and photos of the built-up test model of their new 1/350th scale USS Kidd (DDG-100) kit in our preview...

USS Kidd DDG-100 Arleigh Burke-Class (Flight IIA) Aegis Guided Missile Destroyer – pre-painted kit
By Border Model
Kit no. BN-004
1/350th scale
Photo-etch parts included.
One marking choice included inside
The kit is replicated with a stressed skin effect plus raised & recessed rivets.
The Subject: 
Commissioned into the United States Navy in June 2007, the USS Kidd (DDG-100) is the third American warship named in honour of Rear Admiral Isaac C. Kidd, who lost his life on the bridge of the battleship USS Arizona during the 1941 attack on Pearl Harbour. Built at the Ingalls Shipbuilding yard in Pascagoula, Mississippi, the destroyer actually endured an early trial before ever entering active service when Hurricane Katrina struck the Gulf Coast during her final outfitting, forcing her back into dry dock for major structural and turbine repairs. 

Replenishment at sea with MV Asterix, USS Kidd during RIMPAC 2024
Once operational, the ship quickly established herself as a vital fleet workhorse across the Pacific and Middle East, participating in everything from international maritime exercises and search-and-rescue efforts for Malaysia Airlines Flight 370 to a notable 2012 anti-piracy operation that freed an Iranian fishing crew from Somali pirates. Paying tribute to the original World War II destroyer of the same name—whose crew famously adopted seventeenth-century privateer Captain William Kidd as their mascot—DDG-100 holds the rare distinction of being the only active US Navy warship officially authorised to fly the Jolly Roger pirate flag.

Sailors aboard the Arleigh Burke-class guided-missile destroyer USS Kidd (DDG 100) watch as the ship departs from Naval Air Station North Island, June 4, 2021.
Technically, the vessel belongs to the Flight IIA sub-class of the formidable Arleigh Burke-class guided missile destroyers, stretching just over 509 feet in length and displacing roughly 9,200 tonnes at full load. Driven by four General Electric LM2500 gas turbines pushing 100,000 shaft horsepower across twin shafts, she is capable of slicing through rough seas at speeds exceeding 30 knots. 

A closeup of the Jolly Roger that USS Kidd was flying when it returned to its homeport of Naval Station Everett on Sept. 21, 2020., USN
Designed around the integrated Aegis Combat System and its distinctive flat-panel phased array radar arrays, the Flight IIA configuration introduced twin aft hangars capable of embarking two Sikorsky MH-60R Seahawk helicopters for extended anti-submarine and surface warfare reach. Her offensive and defensive punch is equally impressive, centred on 96 Mark 41 Vertical Launching System cells loaded with Standard air-defence missiles, Tomahawk land-attack cruise missiles, and anti-submarine rockets, backed up by a rapid-firing 5-inch main deck gun, Phalanx close-in weapon systems, and triple torpedo tubes.

The Kit
Border Model has engineered this release as a "Paints Free / Cement Free" snap-fit kit, aimed at delivering an easy-to-make, detailed warship without the traditional barriers of airbrushing or glue assembly. Notably, the built sample shown in the preview is assembled completely glue-free and features no additional painting aside from a subtle rust wash - we look at their photos to show you a little more about this kit.

Key features of the kit include:
• Pre-painted & Colour-Separated Parts: The upper hull, lower hull, decks, and superstructure components come pre-moulded and pre-painted in their respective Haze Grey, anti-fouling hull red, and dark deck greys. The lower hull also features a pre-coated anti-corrosion primer finish, and a black boot-topping line separates the hull colours cleanly.
• Single-Piece Hull & First-Batch Bonus Base: The main hull is designed as a single, stress-reducing piece with crisp hull plating and porthole detail. As an added incentive, customers who place pre-orders for the first production batch will receive a solid wood display base and metal support struts included as a free gift.
• Multimedia & Photo-Etch: To elevate the out-of-the-box look, Border Model includes two frets of pre-painted, colour-matched photo-etched (PE) parts. These cover fine deck railings, safety netting around the helipad, radar arrays, and mast details—meaning no tricky painting of delicate brass is required.
• 3D-Printed & Resin Upgrades: The kit incorporates pre-shaded 3D-printed parts for fine assemblies, including a complete shipborne MH-60 Seahawk helicopter for the aft flight deck, a detailed 5-inch main deck gun, and a resin-printed bridge console.
• Dynamic Effect Parts: A translucent smoke/exhaust effect part is included on the runners alongside ready-to-install wiring and launch effects for builders who want to add a bit of action to their display.
• Waterslide Decals: Even with pre-applied markings on the flight deck, a comprehensive waterslide decal sheet is supplied. It features the hull number "100" in shaded white lettering, draft marks, ship crests, helicopter markings, the Stars and Stripes, and large, flowing Jolly Roger pirate flags for the mast and stern.
The sprue map is below: Note the pre-coloured parts being shown on here.

This kit is not on their website yet, but Hobbylink Japan always gets their kits. Check out the Border Model website for more information...