Linden Models has been hard at work, with several new figure sets, all unique & steeped in historical interest for modellers. We look at their latest sculpts in our preview...
.webp)
Preview: Six New Figures in September from Linden Models
Linden Models are continuing their unique figure sculpt line-up of 1/35 scale miniatures that swaps well-trodden historical subjects for the diverse, irregular factions of the Spanish Civil War. This initial release leverages high-resolution 8K resin printing to deliver a deeply researched cross-section of the 1936–1939 conflict, capturing the contrasting uniforms and distinct identities of both Republican and Nationalist combatants. From the improvised boiler suits and crossed ammunition bandoliers of an anarchist dinamiteros to the unique khaki tropical coveralls and skull-badged berets worn by the German tank instructors of Panzergruppe Drohne, the range reflects a meticulous attention to textile textures and scale-accurate equipment. Rounding out the collection are striking figures like the rifle-less Cristóforo carrying a heavy religious standard, a Republican DP-28 machine gunner, a land-fighting infantry sailor from the 151st Mixed Brigade, and a highly customisable Spanish Navy sailor—each serving as an authentic historical type rather than a generic military portrait.
German Tanker
From Linden Models
1/35th scale
Kit No: LM35F-
1 single figure, printed in resin.
Price: €14 EUR
Linden Models has utilised 8K resin printing to produce a low-part-count miniature that avoids the soft definition often found in traditional slide-moulded plastics. The sculpting on the tropical one-piece coverall captures natural, gravity-affected fabric folds rather than forced, rigid creases. The digital design shines in the micro-detailing; the fabric tension around the cloth belt, the distinct stitching on the twin button-down breast pockets, and the clean edge lines of the individual buttons are cleanly rendered via the photopolymer material.
The focus of the sculpture centres on the accuracy of the uniform insignia and personal gear. The black Spanish-style beret features a finely raised Totenkopf (skull-and-crossbones) badge, complete with its distinct yellow felt backing lip and the separate, minuscule swastika pinned beneath it—details that remain readable under a magnifying glass. For gear, the soldier carries an accurately proportioned enamel or tin drinking mug. The handle is printed thin and in true scale, avoiding the clunky, oversized look common in injection plastic, while his standard-issue leather belt and metal buckle show clean definition separate from the torso fabric.
Dinamitero, Columna Durruti (Aragón Front, 1936)
From Linden Models
1/35th scale
Kit No: LM35F-010
1 single figure, printed in resin.
Price: €14 EUR
This 8K photopolymer resin figure highlights multi-layered texturing, presenting a complex layout that showcases the advantages of digital master patterns. The character’s posture conveys the physical weight of his specialised role, with the anatomical tension of a miner turned irregular fighter built directly into the pose. Because it is printed with optimised, pre-calculated supports, the deep undercuts beneath the clothing and equipment are preserved cleanly, meaning clean-up is minimal and the risk of shearing fine details during preparation is reduced.
The detailing on the figure’s improvised gear is heavily defined. The crossed canvas cartridge bandoliers slung across his chest feature distinct fabric weave textures, individual pocket flaps, and visible stitching lines. Even more distinct is the dedicated grenade loop array; each individual explosive charge shows clean separation from the main body, ensuring that washes and filters will settle predictably during painting. On his feet, the traditional rope-soled alpargata sandals boast a microscopic braided texture along the trim, contrasting with the heavier, coarse textile folds of his army-issue grenadier trousers.
Republican DP-28 Gunner (Battle of Madrid, 1936)
From Linden Models
1/35th scale
Kit No: LM35F-012
1 single figure, printed in resin.
Price: €14 EUR
Capturing a dynamic stance from the urban defence of Madrid, this figure is an excellent example of blending organic and mechanical textures. The sculptor has contrasted the heavy, stiff drape of the fighter’s civilian leather jacket against the lighter, wrinkled cotton fabric of the work shirt underneath. Thanks to the high-resolution 8K printing process, there is no evidence of layer lines or pixel stepping on the smooth curved surfaces of the Spanish M26 "Concha" steel helmet, which sits naturally over the head with realistic rim thickness.
The weapon engineering on this kit is a primary highlight for small-scale arms enthusiasts. The Soviet-supplied DP-28 light machine gun is an accurate 3D replica. The weapon's signature top-mounted "record player" pan magazine features sharp radial grooving and a defined catch mechanism. The cooling jacket slots along the barrel are cleanly hollowed out—a feat nearly impossible in traditional two-part plastic moulds without complex slide inserts. Additionally, the thin bipod legs and the weapon's trigger guard are printed with impressive structural rigidity while maintaining a strictly scale-accurate thickness.
Cristóforo Requeté (1936–1939)
From Linden Models
1/35th scale
Kit No: LM35F-009
1 single figure, printed in resin.
Price: €14 EUR
Linden Models has managed to inject a significant amount of cultural and historical narrative into this resin sculpt through texture contrast. The figure's civilian wool shirt features a finely etched, recessed grid pattern that provides an ideal guide for painters attempting a complex plaid or checked pattern. The iconic Carlist boina roja (red beret) is sculpted with a natural, slouching drape over the side of the head and features a fine, dangling tassel that is printed clear of the face to allow for easy paintbrush access.
In terms of equipment, this kit trades standard infantry firearms for symbolic religious items. The large, cross-topped religious standard carried by the cristóforo is a highly detailed piece of micro-sculpting. The crucifix features clean geometric lines, tiny cast-in relief elements, and a realistically draped fabric banner that twists naturally around the staff. The character’s hands are printed with separate, detailed fingers wrapped tightly around the pole, completely eliminating the soft, "moulded-together" look that often plagues mass-produced plastic figures.
Marinero - At the Front (151st Mixed Brigade, 1937)
From Linden Models
1/35th scale
Kit No: LM35F-008
1 single figure, printed in resin.
Price: €14 EUR
This kit provides an excellent study in mixed military textures, expertly translated through high-end 8K resin printing. The sculpt balances the smooth, heavy wool drape of a traditional naval jumper and bell-bottom trousers with the rough, utilitarian nature of army infantry gear. The facial sculpt is full of character, depicting a weathered sailor adapted to the harsh conditions of land combat. The parts breakdown is intelligently engineered along natural seam lines, ensuring that the attachment points for the arms and gear require virtually zero filler during assembly.
The infantry equipment is rendered with incredible precision. The brown leather infantry webbing features defined straps that sit on top of the jumper rather than looking melted into it, complete with individual brass buckles and distinct ammunition pouches with tiny retaining rivets. The main rifle is a standout piece of digital carpentry; the wooden stock shows subtle grain direction, the bolt assembly is cleanly delineated, and the long infantry bayonet is cast straight with a sharp fuller groove running down the blade.
Marinero Español (Spanish Navy Sailor, 1936–1939)
From Linden Models
1/35th scale
Kit No: LM35F-007
1 single figure, printed in resin.
Price: €14 EUR
The engineering design of this kit emphasises customisability without sacrificing scale accuracy. Linden Models has utilised the precision of digital printing to offer modular options that fit together with absolute accuracy. The kit includes alternative right arms and separate cap ribbons. The engineering behind the joints is clever, using subtle tongue-and-groove locators that ensure the arms lock into an anatomically correct position whether you build the figure giving a traditional military salute or a political raised-fist gesture.
The mechanical details on the sailor's dress uniform are beautifully sharp. The wide sailor’s collar (bata) lays flat over the shoulders with recessed piping lines along the edges. The cap is sculpted with an ultra-thin rim, and the interchangeable cap-ribbon options are marvels of 3D printing. The tiny, raised lettering for both the LEPANTO and BALEARES ship names is clearly defined, ensuring that even a basic dry-brushing or edge-highlighting technique will make the typography pop cleanly without blurring into the background ribbon fabric.
For more on their figures & where to buy closer to you, you can check out the Linden Models website.